schlage keyless door lock troubleshooting

If it is, use a small flathead screwdriver to rotate the lock override slot to NORMAL. Check the lock override slot to confirm it is in the LOCKOUT position.When engaged, a key must be used to unlock the lock. This feature can be used to completely disable the keypad. Sometimes, if after entering your user code the lock blinks green but won’t open, it could be because Lock Override is enabled. Try a fresh battery, especially if you are using lithium or other non-high quality batteries.If the user code didn’t work, perform a factory default reset.Once you have verified the lock is installed completely and correctly, try a user code.If the latch does not retract, contact Schlage customer service for assistance.Rotate the inside lever down and see that the latch retracts.On keypad levers (FE575 and FE595) verify the following:.Verify the installation is complete and correct.If the Schlage light blinks green after a code is entered but won’t open, try the following troubleshooting to resolve the problem: Vacation mode is successfully disabled when the Schlage button indicates one green light and you hear one long beep.

To disable vacation mode, follow these steps: When enabled, no user codes will unlock the door, preventing any unauthorized attempts of entry when no one is home for a prolonged period of time. If the user code does not unlock your Schlage lock and the Schlage button lights green then red, with 1 high and 1 low beeps, it is because vacation mode is enabled. You will need to verify that you have entered a valid user code to unlock.

If the user code does not unlock your Schlage lock and the Schlage button lights red, with 2 beeps, then the user code you have entered is not a valid user code.

Open the battery compartment and replace the battery.

To change the battery on a Schlage model FE575: To change the battery on a Keypad Lock (Model FE595):

Re-tuck wires so they will not be crimpled.

If red is blinking, it indicates critically low battery or it is dead and will need to be replaced.Ĭheck this too: Sharp TV Troubleshooting and How-to Guide To change the battery on a Keypad Deadbolt (Model BE365):.

If your Schlage lock indicates red, it could mean any of the following: The color of the Schlage button indicates the status of the lock.

Rotate the thumbturn 90 otoward the hinges.

Push the key and cylinder into the thumbturn.

Note that the key cannot be removed from the cylinder while the lock is unlocked.

Rotate the knob/lever to open the door.

To unlock using Key Override: For Keypad Locks When the battery is completely dead, you can use Key Override to unlock your Schlage keypad lock. How to Unlock a Schlage Keypad Lock with a Dead Battery If it doesn’t unlock the lock, start over at step 2.

Try entering one of the defaults user codes.

Then, press and hold the Schlage button until it light green and the lock beeps.

The Schlage button will light green for one second.

The following steps must occur within 10 seconds:.

You must remove the keypad from the door to see the sticker with the code at the back.

Locate the default programming and user codes on your user guide or the at the back of the keypad assembly.

If you don’t remember or have lost the programming code, here is what you need to do to reset your lock to factory default: How to Reset Schlage Keypad Lock without Code You can use the portal to reset or add code instead of programming it into the code manually. There, you can create a user profile where you can all the settings and codes of the lock. If you have a new version of a Schlage lock, many of the programming and resetting can be done via the lock’s web portal found at.

Once complete, your door lock will be completely reset to the original settings. Press and hold the Schlage button for at least 5 seconds.Using a screwdriver, remove the cover plate of the Schlage lock,.If you wish to reset your Schlage door lock, you can restore it to its factory settings and reprogram the lock. If you are having challenges with your Schlage keypad lock, here is a simple troubleshooting guide to help you resolve some of the common issues. But being modern locks that incorporate advanced technology, some users may have difficulties performing certain functions or going around some issues they encounter that ordinarily require just a little troubleshooting. Schlange is known for producing top-quality, reliable keyless entry systems for residential entry doors.

Schlage keyless door lock troubleshooting